Super DriveLock Basic Kit

eSATA Connection to your PC or NoteBook!
The Super DriveLock is the only blocker in the market today that prevents accidental writes to Hard Drives combining so many interfaces in one single device.As stand alone or in-Bay, the Super DriveLock supports IDE 133 drives, SATA II drives with 3Gbit/sec, SCSI drives with 320 MB/sec, and USB 2.0 storage with 480 Mbit/sec.



Features:

.: Multi Media Write-Protect Support: Built-in USB 2.0, P-ATA, S-ATA and SCSI interfaces provides native write protect support for USB, P-ATA, S-ATA, and SCSI devices. Supports SCSI interfaces such as Ultra-160 and Ultra-320, including SCSI Narrow (50-pin), SCSI Wide (68-pin) and SCSI-SCA80 (80-pin). Supports 3.3v devices.

.: High Speed Operation: Transfer rates can exceed 3.5GB/min

.: Multiple O/S Host Support: Supports Windows XP, Windows VISTA and Linux.

.: Upgradable Firmware: The unit's firmware can be easily upgraded using the PC's interface.

.: Multiple Host Interface Support: Unit can be connected to the PC or Notebook using multiple interfaces such as native S-ata port, eSATA controllers, eSATA CardBus adapters.

.: Portable: Can be used as a portable device or mounted in a PC available drive bay.

.: HPA/DCO Support: Detects HPA and DCO areas

.: 3.3v Device Support: Provides output for devices which require 3.3v for operation.

.: Status leds: 4 leds; IDE drive detected, SATA drive detected, SCSI drive detected, USB device detected


Optional Hardware

.: eSATA PCI Controller Card: Provides a “hot swap” eSATA interface to connect the Super DriveLock with the PC. Installs in a PC’s available PCI Slot.
.: eSATA PCI-EXP Controller Card:Provides a “hot swap” eSATA interface to connect the Super DriveLock with the PC. Installs in a PC’s available Express Slot.
.: Power Supply + USB to SATA Adapters:The Power Supply provides external power for the Super DriveLock device, allowing the SDL to be used as a portable device. The USB to SATA adpater can used to connect the SDL to the PC or Notebook using the USB interface.
.: Super DriveLock Hard Case:Provides a portable carry case for the Super DriveLock device.



Specification

Super DriveLock Basic Kit:
Each Basic Unit Kit includes:
(1) Super DriveLock Unit
(1) External USB Device Data Cable
(1) S-ATA Data/Power Cable
(1) 8" P-ATA /SCSI Power Cable
(1) 6" S-ATA 3.3v/5v Power Cable
(1) 6" S-ATA Dta Cable
(1) 6" SCSI Data Cable
(1) SCSI Terminator
(1) 5" P-ATA Data Cable
(1) eSATA to S-ATA Data Cable
(1) USB A to A F/W Upgrade Data Cable
(1) eSATA to eSATA Data Cable
(1) 36" P-ATA/SCSI Power Cable
(1) SCSI Narrow Adapter
(1) SCSI SCA80 Adapter
(1) 18" P-ATA Data Cable
Warrany Documents


Compatibility

.: SATA Devices: SATA 150 or SATA 300 hard disk devices
.: IDE Devices: Supports the USB 2.0 or FireWire 1394B specifications for High Speed operation.
.: Hot Swap Capability: Parallel ATA hard disk devices with LBA ( Logical Block Addressing) support
.: SCSI Devices: From SCSI-1 to Ultra-320 with connection: Narrow (50P), Wide (68P), SCA80 (80P)
.: USB Devices: High speed 2.0 or USB 1.1
.: Host Interface: SATA, USB 2.0
.: Host O/S: Windows XP, 2000/VISTA, Macintosh OS, Solaris, Linux


DriveLock supports IDE 133 drives, SATA II drives with 3Gbit/sec, SCSI drives with 320 MB/sec, and USB 2.0 storage with 480 Mbit/sec.